Lihlahisoa
Theipi ea ho Jara e Fofang ea Polystyrene
Sinho e fana ka Theipi e nang le mefuta e fapaneng ea Flat Punched Carrier e etselitsoeng lits'ebetso tsa Theipi le Reel, ho kenyeletsoa le li-reel tsa likarolo tse sa fellang. E lumellana le mefuta e mengata ea li-feeder tsa SMT pick and place. Theipi ea rona ea Flat Punched Carrier e fumaneha ka botenya le boholo bo fapaneng, ka likhetho tsa thepa ho kenyeletsoa polystyrene e hlakileng le e ntšo, polycarbonate e ntšo, polyethylene terephthalate e hlakileng le pampiri e tšoeu. Ho feta moo, theipi ena e phunyeletsoeng e ka hokelloa holim'a li-reel tsa SMD tse teng ho atolosa bolelele ba tsona, ho fokotsa litšila.
Theipi e Tšoarellang ea Polycarbonate (PC) ke thepa e ntšo e tsamaisang motlakase e etselitsoeng ho sireletsa likarolo ho tsoa ho electrostatic discharge (ESD). E tla ka botenya bo fapaneng, ho tloha ho 0.30mm ho isa ho 0.60mm, 'me e fumaneha ka bophara bo fapaneng ba theipi, ho qala ho tloha ho 4mm ho ea ho 88mm.
Lintlha tse qaqileng
| E entsoe ka polycarbonate e ntšo e tsamaisang motlakase bakeng sa tšireletso ea ESD | E fumaneha ka botenya bo boholo: 0.30mm ho isa ho 0.60mm | Boholo bo fumanehang: 4mm, 12mm, 16mm, 24mm, 32mm, 44mm, 56mm, esita le ho fihlela ho 88mm | ||
| E lekana boholo ba li-feeder tsa SMT tse khethiloeng le tse behiloeng | E fumaneha ka bolelele ba limithara tse 400, limithara tse 500 le limithara tse 600 | Bolelele bo ikhethileng bo ka fanoa |
Bophara bo fumanehang
Sephara8-24mm feela ka masoba a sprocket
| SO | E | PO | DO | T | |
| / | 1.75 ± 0.10 | 4.00 ± 0.10 | 1.50 +0.10/-0.00 | 0.30 ± 0.05 | |
| 12.00 ±0.30 | / | 1.75 ± 0.10 | 4.00 ± 0.10 | 1.50 +0.10/-0.00 | 0.30 ± 0.05 |
| 16.00 ±0.30 | / | 1.75 ± 0.10 | 4.00 ± 0.10 | 1.50 +0.10/-0.00 | 0.30 ± 0.05 |
| 24.00 ±0.30 | / | 1.75 ± 0.10 | 4.00 ± 0.10 | 1.50 +0.10/-0.00 | 0.30 ± 0.05 |
Sephara32-88mm ka masoba a sprocket le masoba a elliptical
| W | SO | E | PO | DO | T |
| 28.40 ±0.10 | 1.75 ± 0.10 | 4.00 ± 0.10 | 1.50 +0.10/-0.00 | 0.30 ± 0.05 | |
| 44.00 ±0.30 | 40.40 ±0.10 | 1.75 ± 0.10 | 4.00 ± 0.10 | 1.50 +0.10/-0.00 | 0.30 ± 0.05 |
| 56.00 ±0.30 | 52.40 ±0.10 | 1.75 ± 0.10 | 4.00 ± 0.10 | 1.50 +0.10/-0.00 | 0.30 ± 0.05 |
Matlotlo a Tloaelehileng
| Mefuta | SINHO | |
| 'Mala | Botsho | |
| Thepa | Polystyrene (PS) e tsamaisang motlakase | |
| Bophara ka Kakaretso | 8mm, 12mm, 16mm, 24mm, 32mm, 44mm, 56mm, 72mm, 88mm, | |
| Botenya | 0.3mm, 0.4mm, 0.5mm, 0.6mm kapa botenya bo bong bo hlokahalang | |
| Bolelele | 400M, 500M, 600M kapa bolelele bo bong bo ikhethileng |
Thepa ea Thepa
PS e tsamaisang
| Matlotlo a 'Mele | Mokhoa oa teko | Yuniti | Boleng |
| Matla a khoheli a itseng | ASTM D-792 | g/cm3 | 1.36 |
| Matlotlo a Mekaniki | Mokhoa oa teko | Yuniti | Boleng |
| Matla a ho Tenyetseha @Yield | ISO527-2 | MPA | 90 |
| Tensile Elongation @Break | ISO527-2 | % | 15 |
| Matlo a Motlakase | Mokhoa oa teko | Yuniti | Boleng |
| Khanyetso ea Bokaholimo | ASTM D-257 | Ohm/sekwere | / |
| Mokhoa oa teko | Yuniti | Boleng | |
| Mocheso o khopameng oa mocheso | ISO75-2/B | ℃ | 75 |
| Optical Matlo | Mokhoa oa teko | Yuniti | Boleng |
| Phetiso ea Leseli | ISO-13468-1 | % | 91.1 |
Bophelo ba Shelf le Polokelo
Sebelisa pele ho selemo se le seng ho tloha letsatsing la tlhahiso. Boloka ka har'a sephutheloana sa pele, tikolohong e laoloang e nang le mocheso oa 0-40℃ le mongobo o ka tlase ho 65%RHF. Sireletsa mongobong le khanya ea letsatsi e tobileng.
Kamber
E latela maemo a EIA-481, e netefatsa hore camber ha e fete 1mm boleleleng bo bong le bo bong ba 250mm.
Lisebelisoa
| Matlotlo a 'Mele bakeng sa Thepa | Leqephe la Lintlha tsa Polokeho ea Lintho |
| Ho taka | Litlaleho tse Lekiloeng ka Polokeho |
