Lihlahisoa
Polycarbonate Flat Punched Carrier Tape
Sinho's Flat Punched Carrier Tape e etselitsoe baetapele ba Tape le Reel le litereilara bakeng sa likarolo tse sa fellang, 'me e loketse ho sebelisoa le li-feeders tse ngata tsa SMT. Sinho's Flat Punched Carrier Tape e fumaneha hore e ka etsoa ka boto ea botenya le boholo ba tepi ka thepa e hlakileng le e ntšo ea polystyrene, thepa e ntšo ea polycarbonate, thepa e hlakileng ea polyethylene terephthalate, le thepa ea pampiri e tšoeu. Theipi ena e phunyeletsoeng e ka tšeloa ho li-reel tsa SMD tse teng ho atolosa bolelele le ho qoba litšila.
Polycarbonate (PC) Flat Punched Carrier Tape ke lisebelisoa tse ntšo tsa conductive tse sireletsang likarolo ho tsoa ho electrostatic discharge (ESD). Boitsebiso bona bo fumaneha ka bongata bo boholo ho tloha ho 0.30mm ho isa ho 0.60mm bakeng sa tepi e fapaneng ea bophara ho tloha ho 4mm ho ea ho 88mm.
Lintlha
| E entsoe ka thepa e ntšo ea polycarbonate e sirelletsang ho ESD | E fumaneha ka bongata bo boholo ho tloha ho 0.30 ho isa ho 0.60mm | Boholo bo fumaneha ho tloha ho 4mm ho isa ho 88mm | ||
| E loketse ho khetha le ho beha li-feeders tsohle tse kholo tsa SMT | E fumaneha ka bolelele ba 400m, 500m, 600m | Bolelele ba tloaelo boa fumaneha |
Bophara bo fumanehang
Ka bophara8-24mm feela ka masoba a sprocket
| SO | E | PO | DO | T | |
| / | 1.75 ±0.10 | 4.00 ±0.10 | 1.50 +0.10/-0.00 | 0.30 ±0.05 | |
| 12.00 ±0.30 | / | 1.75 ±0.10 | 4.00 ±0.10 | 1.50 +0.10/-0.00 | 0.30 ±0.05 |
| 16.00 ±0.30 | / | 1.75 ±0.10 | 4.00 ±0.10 | 1.50 +0.10/-0.00 | 0.30 ±0.05 |
| 24.00 ±0.30 | / | 1.75 ±0.10 | 4.00 ±0.10 | 1.50 +0.10/-0.00 | 0.30 ±0.05 |
Thepa e Tloaelehileng
| Brands | SINHO | |
| Mmala | Ntsho | |
| Lintho tse bonahalang | Polycarbonate (PC) Conductive | |
| Kakaretso Bophara | 8mm, 12mm, 16mm, 24mm, 32mm, 44mm, 56mm, 72mm, 88mm, | |
| Botenya | 0.3mm, 0.4mm, 0.5mm, 0.6mm kapa botenya bo bong bo hlokahalang | |
| Bolelele | 400M, 500M, 600M kapa bolelele bo bong bo tloaelehileng |
Thepa Thepa
| Thepa ea 'Mele | Mokhoa oa teko | Yuniti | Boleng |
| Matla a Khoheli a khethehileng | ASTM D-792 | g/cm3 | 1.25 |
| Mold Shrinkage | ASTM D955 | % | 0.4-0.7 |
| Thepa ea Mechini | Mokhoa oa teko | Yuniti | Boleng |
| Matla a tšepe | ASTM D638 | Mpa | 65 |
| Flexural Matla | ASTM D790 | Mpa | 105 |
| Flexural Modulus | ASTM D790 | Mpa | 3000 |
| Notched Izod Impact Strength (3.2mm) | ASTM D256 | J/m | 300 |
| Thermal Properties | Mokhoa oa teko | Yuniti | Boleng |
| Melt Flow Index | ASTM D1238 | g/10 mets | 4-7 |
| Thepa ea Motlakase | Mokhoa oa teko | Yuniti | Boleng |
| Bokaholimo ba Resistance | ASTM D-257 | Ohm/sq | 104~5 |
| Thepa ea ho chesa | Mokhoa oa teko | Yuniti | Boleng |
| Boemo ba Lelakabe @ 3.2mm | Ka hare | NA | NA |
| Maemo a Ts'ebetso | Mokhoa oa teko | Yuniti | Boleng |
| Mocheso oa Moqomo | | °C | 280-300 |
| Mocheso oa hlobo | | °C | 90-110 |
| Ho omisa Mocheso | | °C | 120-130 |
| Nako ea ho omisa | | Hora | 3-4 |
| Khatello ea Ente | MED-PHAHAMA | ||
| Tšoara Khatello | MED-PHAHAMA | ||
| Screw Speed | EKETSENG | ||
| Khatello ea Morao | PHAKOANE | ||
Shelf Life le Storage
Sehlahisoa se lokela ho sebelisoa nakong ea selemo se le seng ho tloha ka letsatsi la tlhahiso. Boloka ka har'a sephutheloana sa eona sa mantlha tikolohong e laoloang ke boemo ba leholimo moo mocheso o tlohang ho 0 ~ 40℃, mongobo o lekanyelitsoeng <65%RHF. Sehlahisoa sena se sirelelitsoe letsatsing le tobileng
Camber
E kopana le maemo a hajoale a EIA-481 bakeng sa camber e sa feteng 1mm ka bolelele ba limilimithara tse 250.
Lisebelisoa
| Thepa ea 'Mele bakeng sa Thepa | Ho taka |
| Litlaleho tse Lekoang ka Tšireletseho |
