Lihlahisoa
Theipi e Tapehileng ea Mopalami e nang le Cover Tape
Sinho's Flat Punched Carrier Tape e etselitsoe ho sebelisoa bakeng sa baetapele ba Tape le Reel le litereilara bakeng sa likarolo tse sa fellang, 'me e ka sebelisoa le li-feeders tse ngata tsa SMT. Sinho e fana ka mefuta e mengata ea Flat Punched Carrier Tapes ka botenya le boholo bo fapaneng, e fumanehang ka polystyrene e hlakileng le e ntšo, polycarbonate e ntšo, polyethylene terephthalate e hlakileng, le thepa ea pampiri e tšoeu. Theipi ena e phunyeletsoeng e ka tšeloa ho li-reel tsa SMD tse teng ho atolosa bolelele le ho qoba litšila.
Ntho ena ke tepe e ntšo ea polystyrene e bataletseng e sephara e tiisitsoeng ka Heat Activated Cover Tape (SHHT32 series) 'me e fanoa ka likhoele tse le 'ngoe eseng lirolo. Thepa e entsoeng ka polystyrene e fumaneha ka mefuta e fapaneng ea botenya ho tloha ho 0.30mm ho ea ho 0.60mm bakeng sa mefuta e mengata ea bophara ba tepi ea bophara ho tloha ho 4mm ho ea ho 88mm. 'Me bophara ba SHHT 32 series Heat Activated Cover Tape bo itšetlehile ka boholo ba tepi e phunyeletsoeng.
Lintlha
| Theipi ea polystyrene conductive flat punch carrier theipi e nang le sekoaelo se kentsoeng mocheso (letoto la Sinho SHHT32) | Theipi e phunyeletsoeng e fanoa ka botenya ho tloha ho 0.30mm ho isa ho 0.60mm. | Theipi e phunyeletsoeng e fumaneha ka boholo ho tloha ho 4mm ho isa ho 88mm | ||
| The Width e tiisitsoeng HSA sekoahelo theipi e itšetlehile ka a bataletseng tepe e punch
| E loketse ho khetha le ho beha li-feeders tsohle tse kholo tsa SMT | E fanoe ka bonngoe eseng ka li-roll |
Theipi e Tapehileng ea Mopalami
| Lintho tse bonahalang | Polystyrene Black |
| Ho Feta Bophara | 8 mm, 12 mm, 16 mm, 24 mm, 32 mm, 44 mm, 56 mm, 72 mm, 88 mm |
| Bolelele | Bolelele bo ikhethileng ka mokhoa o le mong |
Thepa Thepa
PS Conductive
| Lintho Tsa 'Mele | Mokhoa oa teko | Yuniti | Boleng |
| Matla a Khoheli a khethehileng | ASTM D-792 | g/cm3 | 1.06 |
| Thepa ea Mechini | Mokhoa oa teko | Yuniti | Boleng |
| Tensile Strength @Yield | ISO527 | Mpa | 22.3 |
| Tensile Strength @Break | ISO527 | Mpa | 19.2 |
| Tensile Elongation @Break | ISO527 | % | 24 |
| Thepa ea Motlakase | Mokhoa oa teko | Yuniti | Boleng |
| Bokaholimo ba Resistance | ASTM D-257 | Ohm/sq | 104~6 |
| Thermal Properties | Mokhoa oa teko | Yuniti | Boleng |
| Mocheso o sothang mocheso | ASTM D-648 | ℃ | 62 |
| Ho fokotseha ha ho bopa | ASTM D-955 | % | 0.00725 |
Theipi ea Sekoahelo se Kentsoeng Mocheso
| Etsa thuto Pthepa | E tloaelehilengBoleng | Mokhoa oa Teko |
| Resistivity ea Bokaholimo (Lehlakore la Karolo) | ≤1010Ω | ASTM-D257,Ω |
| Ea namaPthepa | E tloaelehilengBoleng | Mokhoa oa Teko |
| Ponahalo | Tse pepeneneng | / |
| Botenya: | 0.060 limilimithara±0.005mm | ASTM-D3652 |
| Matla a tšepe (lik'hilograma / 10mm) | ≥3 | ASTM D-3759,N/mm |
| Elongation(%) | ≥20 | ASTM D-3759,% |
| Haze(%) | ﹤13 | JIS K6714 |
| Ho hlakile(%) | 85 | ASTMD1003 |
| Ho khomarela teipi e tsamaisang / Peel | 50 dikgerama ± 30 dikgerama | EIA-481 |
| Tlhokomeliso: Lintlha tsa tekheniki le lintlha tse hlahisitsoeng mona li lokela ho nkoa e le moemeli kapa tse tloaelehileng feela, 'me li lokela ho nkoa ha e sebelisoe bakeng sa merero e khethehileng. | ||
| Chemical Pthepa(ESD ha e na Amines, N-Octanic Acid) | ||
Lisebelisoa
| Thepa ea 'Mele bakeng sa Thepa | Leqephe la Boitsebiso ba Tšireletso ea Material |
| Ho taka |
